| * 60/50 Switchable -- ability to record HDV and DVCAM images at 60i, 50i, 30, 25 or 24 frames per second-in either SD or HD |
* Color Correction -- allows users to adjust the color of a target object without affecting the color of other objects | * DVCAM Support | * Versatile Time code/User bit Operation -- allows any time to be selected as a starting timecode | * Multiple Assign Button Functions -- six assign buttons | * Viewfinder B/W and Color Selectable -- user can operate the viewfinder in color or in black-and-white | * Simultaneous Operation of LCD panel and Viewfinder | * All Scan Mode -- useful when checking image quality for Web applications | * Auto Exposure Override -- allows the user to adjust Iris easily (or Gain if Gain is set to Auto) | * Black Stretch -- raises only the black portion of an image to broaden dynamic range | * 4:3 Output | * Edge Crop at 4:3 -- ideal for 16:9 shooting | * Setup Level Select -- can be selected between 0% and 7.5% when the camcorder is operated in SD mode | * AF Assist -- allows the user to control the focus while in auto focus mode | * External Record Control | * White Balance Outdoor Level Shift -- allows the user to adjust the white balance with fixed color temperature | * Hyper Gain -- enables image acquisition in extreme low-light conditions, even less than 3 lux | * All Display Off -- only mode status on the LCD panel or viewfinder is shown | * Zoom Display Selectable | * Selectable Peaking Level and Color | * Expanded Focus Off Mode | * Safety Zone and 4:3 Marker | * Date and Time Stamp | * XLR Connectors and Mic Power Supply -- 2 XLR connectors are provided and a built-in stereo microphone is standard | * Independent Audio Record Level Set -- 2 audio record level volume controls are at the back of the camcorder, compared with one volume control on the consumer camcorder | * Audio Monitoring -- various modes are available for audio monitoring, such as Ch1 and Ch2, Ch1 only, Ch2 only and Ch1+Ch2 (Mixed) | * Microphone Setting | * Audio Mode -- 32 KHz and 48 KHz can be selected when the Rec Mode is set to either DVCAM or DV SP. When HDV is selected, audio is always 48 KHz and it is compressed with MPEG1 Layer2 | * Audio Lock mode or Unlock mode -- Audio Lock can be selected when the Rec mode is set to DV SP. When HDV is selected, Audio is unlocked. When DVCAM is selected, audio is locked | * Audio Limiter -- On/Off can be selected | * Microphone Noise Reduction -- can be selected On or Off | * Wind Noise Reduction | * Microphone Select -- built-in standard stereo microphone allows users to select Internal Mic or External Mic with XLR | * Internal Microphone Sensitivity -- can be selected as Normal or High | * CineFrame Mode -- offers several options for cine-like shooting in three modes: 30 frames, 25 frames and 24 frames | * Additional CinemaTone and Gamma Settings | * Shot Transition Start Timer -- has a selectable 5-, 10- or 20-second delay to prevent camcorder movement during shots | * Skin Tone Detail Level control -- can be selected as High, Middle and Low | * 480p Output for SD Component Output -- 480i, 480p/480i or 1080i/480i can be selected as the analog component output | * Smooth Handle Zoom | * Audio Output Select -- can be selected as 1Vrms or 2Vrms | * Select Audio Mode at i.LINK Down Convert -- Lock mode or Unlock mode can be selected as the output of the i.LINK when it is down-converted to a DV stream | * Selectable SMPTE Color Bars -- Two types of color bars are provided | * Hours Meter -- for Operation, Drum Run, Tape Run and Threading time are provided |